Compared to the Classic Scout Insert, the Eagle Scout offers:
- 1) Lower sides on the tub itself.
- 2) Chainless tailgate with springs pins for removal and indexed spreader points
- 3) Closed-gap tailgate (when laying down like a pick-up)
- 4) Easy-upgrade to coal chute
- 5) Service access panel in long and short-beds
- 6) Self-aligning sub-frame
- 7) Extended bed length and hinge-point moved back to dump clear of the bumper.
- 8) Enough room on the floor of the long-bed for standard ply-wood sheets.
- 9) Optional topper modules: a. Standard Bulkhead with integrated tarp roller and rear pillars for drop-in wooden sides and gate extender. b. Simple Pick-up rack and rails, for contractor esthetics c. Sides cabinets for long tool storage d. Chipper canopy with higher gate
- 10) Easy upgrade to Spring-retractable tarp
- 11) Can be custom-ordered with thicker floors.
|Features||Classic Scout||Eagle Scout||Liberty Scout|
|L (Long Bed)||S (Short Bed)||L (Long Bed)||S (Short Bed)||L (Long Bed)||S (Short Bed)|
|Aluminum Tub Side Height Above Dumper Floor||<Coming Soon>||<Coming Soon>
|Aluminum Tub Side Height Above Bed Caps||<Coming Soon>||<Coming Soon>||<Coming Soon>|
|Aluminum Tub Side Angle||<Coming Soon> (Steeper, wastes space over fenders)||<Coming Soon> (Shallower, uses more space over fender)
||Low profile to add a variety of upper modules|
|Tailgate Support||Chains||Chainless Cantilever rests|
|Tailgate Latching||Pull-Out 5/8" Hitch Pins with Cotter Pin||3/4" Spring Pins with alignment adjustments|
|Tailgate Upgrades||None||Add a Coal Chute, or upgrade to taller gate for chipper|
|Dumper Sub-Frame||Variable Bolt Pattern, 30" Wide||Variable Bolt Pattern, 34" Wide, 2-axis self aligning||Steel with front yolk and rear roller wheels|
|Service Access||None||Panel in raise floor at the front of tub||T.B.D.|
|Bed Length||102"||<Coming Soon>||108"||<Coming Soon>||108"||<Coming Soon>|
|Dump Hoist||3T Scissor||Not included, Designed for the Amerideck Lift System|
|Special Bed Size:||Fits 4' x 8' Plywood||N/A||Fits 4' x 8' Plywood||Fits 4' Wide Items||Fits 4' x 8' Plywood||Fits 4' Wide Items|
|Floor Thickness:||3/16"||3/16" Standard, can be special ordered (upgraded) to 1/4" or 3/8"|
|Tailgate Gap||Approx .25"||Approx. 0.0625"||Approx. 0.0625"|
|Modular Design||No||No||Standard Bulkhead with side boards, Rack & Rails, Contractor Rack, Chipper Canopy with high gate, or, side cabinets with x-bars|